User`s manual

User’s Manual
39
• RECORD START
Follow the description to record the CRUISE path.
1. Rotate the PTZ Camera to the desired view area (for some protocols,
users may need to do it before entering the OSD), and press <ENTER> to
create the cruise path using the joystick on the control unit. The
percentage of the memory buffer used will be displayed on the screen.
2. Pan, tilt and zoom the PTZ Camera to create a path.
NOTE: Pay attention to the memory size when building a cruise path.
Once the buffer percentage reaches 100%, recording of the path will
stop.
• RECORD END
The cursor will move to RECORD END while you are creating the cruise line;
when the setting is complete, press <ENTER> to save the path.
• RUN CRUISE
Once the setting is complete, press the <ENTER > to run the defined cruise.
• EXIT
Exit the CRUISE menu; go back to the MAIN PAGE 2 to carry on setup of
home setting.
Users could execute the cruise function through the control keyboard.
Please refer to its user manual for further information.
3.3.16 HOME SETTING
The user can set an operating mode to ensure constant monitoring; if the PTZ
Camera is idle for a period of time, the preset function will be activated automatically,
this is the HOME function. The HOME function allows continuous and accurate
monitoring and prevents the PTZ Camera stopping or missing events.
MAIN PAGE 2
ID DISPLAY ON
TITLE DISPLAY OFF
TITLE SETTING 01
PRESET ENTER
SEQUENCE ENTER
AUTOPAN ENTER
CRUISE ENTER
HOME SETTING ENTER