User`s manual

User’s Manual
35
STEP 3: Press <ENTER> again to save the defined preset point.
Once completing setup of a preset point, users could move the cursor to the next
item to run the preset point.
• PRESET RUN
Press <ENTER> and the camera will go to the appointed point. To run other
defined preset point, simply move the cursor back to the last item, select the
preset point that you want to execute, and move the cursor down to PRESET
RUN again.
• EXIT
Exit the PRESET menu and go back to the MAIN PAGE 2 to carry on setup of
sequence.
Users could set preset points through the control keyboard. Please refer to
its manual for further information.
3.3.13 SEQUENCE
This function carries out pre-positioning of the pan, tilt, zoom and focus features in a
certain sequence for a camera. Before setting up this function, the user must set at
least two preset points.
• SEQUENCE LINE
The PTZ Camera has eight built-in sets of sequence lines. First use the
LEFT/RIGHT direction keys to select a line and then set the associated
sequence points.
MAIN PAGE 2
ID DISPLAY ON
TITLE DISPLAY OFF
TITLE SETTING 01
PRESET ENTER
SEQUENCE ENTER
AUTOPAN ENTER
CRUISE ENTER
HOME SETTING ENTER
SEQUENCE
SEQUENCE LINE 1
SEQUENCE POINT 01
PRESET POSITION 001
SPEED 1
DWELL TIME 001
RUN SEQUENCE ENTER
EXIT
YES