User`s manual
User’s Manual
34
STEP 2: Turn on the OSD and go to the MAIN PAGE 2 to select <TITLE
SETTING>.
STEP 3: Select a number to represent the view area.
STEP 4: Press <ENTER> to go into the editing page.
TITLE SETTING: 01
0
1
2
3
4
5
6
7
8
9
EXIT
A
B
C
D
E
F
G
H
I
J
SAVE
K
L
M
N
O
P
Q
R
S
T
LEFT
U
V
W
X
Y
Z
:
/
.
,
RIGHT
[
]
+
?
-
DELETE
TITLE:
ABC
STEP 5: Choose a character with direction keys and then press <ENTER> to input.
For example: <A > <ENTER>, <B> <ENTER>, <C> <ENTER>
TITLE: ABC
STEP 6: To delete input characters, move the cursor to <LEFT> or <RIGHT> and
press <ENTER> to select a character in the entry field. Then move the
cursor to <DELETE> and press <ENTER> to delete the selected
character.
STEP 7: When the setting is completed, move the cursor to <SAVE> and
press <ENTER> to save.
After completing title setting, go back to the MAIN PAGE 2 to carry on setup
of preset points.
3.3.12 PRESET
• PRESET SET
Totally 256 preset points can be set. Follow the steps below when in the preset
setting menu.
STEP 1: Press the right/left key on the keyboard to select a number (1
represents preset point 1, 2 represents preset point 2, etc.)
STEP 2: Press <ENTER> and then rotate the dome camera to a targeted
shooting area/point.
MAIN PAGE 2
ID DISPLAY ON
TITLE DISPLAY OFF
TITLE SETTING 01
PRESET ENTER
SEQUENCE ENTER
AUTOPAN ENTER
CRUISE ENTER
HOME SETTING ENTER