User`s manual

User’s Manual
33
3.3.9 ID DISPLAY
The user can choose whether the PTZ Camera ID will be displayed on the monitor to
identify the camera. For more information, refer to section 2.4 PTZ Camera ID
Setting.
• ON
Display the ID address of the selected camera in the bottom right of the
monitor screen.
• OFF
Hide the ID address of the selected PTZ Camera.
3.3.10 TITLE DISPLAY
The user can name a certain view area and display its title for easy recognition. In
this option, the user can choose whether or not to display the titles set in advance.
• ON
A title set for a certain view will be displayed when the PTZ Camera returns to
that view area.
• OFF
If TITLE DISPLAY is set to <OFF>, no title will be displayed on the screen
even if titles have been set.
3.3.11 TITLE SETTING
Up to 16 zone titles can be set with a maximum 20 characters for each title. The user
can name the zone titles with privacy mask ID numbers for future recognition.
NOTE: For 23× and 35× models, the available area for setting the privacy
mask is restricted within tilt angle 45°.
Follow the steps below to set a camera title.
STEP 1: Operate the camera to a view area where you want to set a title for it.
MAIN PAGE 2
ID DISPLAY ON
TITLE DISPLAY OFF
TITLE SETTING 01
PRESET ENTER
SEQUENCE ENTER
AUTOPAN ENTER
CRUISE ENTER
HOME SETTING ENTER