User`s manual

User’s Manual

NOTE: To make the PTZ Camera tilt between a specific range, such

as -10° to +100° or -10° ~ +190°, please go to ANGLE ADJUSTER

(see next section) to set the angle range of tilt. Otherwise, the camera will

tilt 90° as the default setting.

• ANGLE ADJUSTER

The item is for adjusting the angle of view. The Range of the view angle

varies in different FLIP modes: the angle ranges from -10° to +100° in the

M.E. FLIP and FLIP OFF modes, and from -10° ~ +190° in the IMAGE FLIP

mode.

• SPEED BY ZOOM

If the option is set to <ON>, the pan/tilt speed will be adjusted by an internal

algorithm when zooming automatically. The larger zoom ratio results in a

slower rotation speed.

• AUTO CALI. (Auto Calibration)

There are one horizontal point and one vertical infrared rays check point in

each PTZ Camera. During installation or maintenance, the PTZ Camera’s

position may be moved. Therefore, the relative distance between the original

set point and the check point will be changed. If enable the Auto Calibration

function, the camera will automatically detect the matter and reset the

horizontal point back to the original position.

• SYSTEM RESET

Select this item for remote resetting.

• EXIT

Exit the SETUP MENU 2 and go back to the MAIN PAGE 1. Then go to the

MAIN PAGE 2 to carry on setting other functions.

ANGLE ADJUSTER

ADJUST MIN ANGLE -10 DEG

ADJUST MAX ANGLE 100 DEG

EXIT+SET

YES