User`s manual

User’s Manual

mentioned camera parameters.

3.3.3 BACKLIGHT

The backlight compensation function prevents the central object from being too dark

in surroundings where excessive light is shining from behind it.

18×/26× Model:

Select <ON> to activate the function; the center object will be brightened in contrast

to the edge of the picture (where a backlight would be most likely located).

After completing setup of backlight, go back to the Main Page 1 and continue to set

the focus relevant values.

22×23× Model:

The Backlight Compensation Level ranges from 00 to 30.

NOTE: If this function is enabled, the WDR function (for 23×/35× Model) will

be disabled automatically. For details, refer to section 3.3.20 WDR Setting.

After completing setup of backlight, go back to the Main Page 1 and continue to set

the focus values.

MAIN PAGE 1

LANGUAGE ENGLISH

DEFAULT CAMERA ON

BACKLIGHT OFF

FOCUS AUTO

AE MODE AUTO

WBC MODE AUTO

SETUP MENU 1 ENTER

SETUP MENU 2 ENTER