User`s manual

User’s Manual

Switch no. Protocol Baud rate

00 VCL 9600

01 Pelco D 2400

02 Pelco P 4800

04 Chiper 9600

05 Philips 9600

07 GANZ-PT 9600

08 AD422 4800

09 DM P 9600

11 Pelco D 4800

12 Pelco D 9600

13 Pelco P 2400

14 Pelco P 9600

15 JVC 9600

16 GANZ-S 4800

17 GANZ-S 9600

18 GANZ-S 19200

19 GANZ-S 38400

KALATEL RS485

9600

KALATEL RS422

4800

*GANZ-PT is for ZC-PT series PTZ Camera. GANZ-S is for ZC-S series PTZ Camera.

For example, select protocol Pelco D with a baud rate of 2400, the ID switch should

be set as shown below.

Tens Units

NOTE: Change the PTZ Camera’s control protocol only when the camera is

powered off.

After changing protocol, please do the following procedure:

(1) Set SW 5(Communication switch) on.

(2) Power on the camera and check the message on the screen.

(3) Power off and set SW 5(Communication switch) off.