User manual

Speed Dome Camera Instruction Manual
8
DIP Switch Setup
Before you install the camera, you should set the DIP switches to configure the camera ID and communication
protocol.
 Camera ID Setup
123456
ON
ON
78
Pin 1 2 3 4 5 6 7 8 Pin 1 2 3 4 5 6 7 8
ID 1 2 4 8 16 32 64 128 ID 1 2 4 8 16 32 64 128
1 on off off off off off off off 11 on on off on off off off off
2 off on off off off off off off 12 off off on on off off off off
3 on on off off off off off off 13 on off on on off off off off
4 off off on off off off off off 14 off on on on off off off off
5 on off on off off off off off 15 on on on on off off off Off
6 off on on off off off off off 16 off off off off on off off off
7 on on on off off off off off 17 on off off off on off off off
8 off off off on off off off off 18 off on off off on off off off
9 on off off on off off off off 19 on on off Off on off off off
10 off on off on off off off off 20 off off on off on off off off
z The ID number of camera is set using a binary number. Examples
shown below.
z The range of ID is 1~255. Do not use 0 as camera ID. Factor y
default of Camera ID is 1.
u want to control a c amera, you must match the camera
ID with Cam ID setting of DVR or Controller.
z If yo ertain c
2
INSTALLATION