User manual

Speed Dome Camera Instruction Manual

Pattern Setup

PATTERN SETUP

------------------------

PATTERN NO. 1

UNDEFINED

CLR PATTERN CANCEL

BACK

EXIT

 Edit Pattern

EDIT PATTERN 1

------------------------

MOVE TO START POSITION

[NEAR:START /FAR:CANCEL]

EDIT PATTERN 1

[NEAR:SAVE /FAR:DELETE]

0/0/x1/N

HOW TO USE OSD MENU

z Pattern Number

z Clear Pattern [CANCEL/OK]

Deletes data in current pattern

z Edit Pattern Starts editing pattern.

[1~4 ]

Selects Pattern number to edit.

If a selected pattern number is not defined,

"UNDEFINED" will be displayed under

selected pattern number.

① Using Joystick, move to start position with appropriate zoom. To

start pattern recording, press NEAR key. To exit this menu, press

FAR key.

② Move camera with controller joystick or run preset function to

memorize a path (often a curved path) in a selected pattern. The

total memory size and remaining memory size are displayed in

the form of a bar. Maximum 1200 communication commands can

be stored in a pattern.

③ To save data and exit, press NEAR key. To cancel recording and

delete record data, press FAR key.