User manual

Speed Dome Camera Instruction Manual
31
 Parking Action Setup
PARKING ACTION SETUP
------------------------
PARK ENABLE OFF
WAIT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
 Alarm Input Setup
ALARM INPUT SETUP
------------------------
ALARM1 TYPE N.OPEN
ALARM2 TYPE N.OPEN
ALARM3 TYPE N.OPEN
ALARM4 TYPE N.OPEN
ALARM1 ACT NOT USED
ALARM2 ACT NOT USED
ALARM3 ACT NOT USED
ALARM4 ACT NOT USED
BACK
EXIT
4
HOW TO USE OSD MENU
If Park Enable is set to ON, camera runs assigned function automatically
i comman
z Park Enable [
z Wait Time [1~10/15/30 seconds & 1/2/3/4 minutes]
The time is displayed with "hh:mm:ss" format
a
z Park Action [ /GROUP]
{
f there is no PTZ d during assigned "Wait Time".
ON/OFF]
nd can be changed in 1 min units.
HOME/PRESET/PATTERN/SWING
HOME
C
P
amera moves to home position if there is no
TZ command during assigned "Wait Time".
Matches the Alarm sensor If an external
sensor is activated, camera will move to corresponding preset position
w redefined.
z Alarm × Type [
S
z Alarm × Action [
Assign counteraction Preset position to each
A
input to one of Preset positions.
hen this item is p
Normal OPEN/Normal CLOSE]
ets sensor input type.
NOT USED/PRESET 1~128]
larm input.