User`s guide

Using the Command Line Interface Cayman 3220-H User’s Guide
4-12 December 2000
show dhcp server leases [ used | free ]
Displays the DHCP leases stored in RAM by your Cayman 3220-H.
You can include the used argument to see the list of DHCP leases that
are in use or that have been used since your Cayman 3220-H was
restarted. You can include the free argument to see the list of DHCP
leases that are available for use.
show dhcp server store
Displays the DHCP leases stored in NVRAM by your Cayman 3220-H.
show dsl
Displays DSL port statistics, such as upstream and downstream
connection rates and noise levels.
show enet
Displays the Ethernet statistics for your Cayman 3220-H.
show ip arp
Displays the Ethernet address resolution table stored in your Cayman
3220-H.
show ip igmp
Displays the contents of the IGMP Group Address table and the IGMP
Report table maintained by your Cayman 3220-H.
show ip interfaces
Displays the IP interfaces for your Cayman 3220-H.
show ip routes
Displays the IP routes stored in your Cayman 3220-H.
show log
Displays blocks of information from the Cayman 3220-H diagnostic
log. To see the entire log, you can repeat the show log command or
you can enter show log all and scroll through the complete log.