User`s guide

Cayman 3220-H User’s Guide Using the Command Line Interface
December 2000 4-11
reset ppp vccn
Resets the point-to-point connection over the specified virtual
circuit. The command only applies to virtual circuits that use PPP
framing.
restart [seconds]
Restarts your Cayman 3220-H. If you include the optional seconds
argument, your Cayman 3220-H will restart when the specified
number of seconds have elapsed. You must enter the complete
restart command to initiate a restart.
show atm [all]
Displays ATM statistics for your Cayman 3220-H. If you include the
optional all argument, your Cayman 3220-H will display a more
detailed set of ATM statistics.
show bridge interfaces
Displays bridge interfaces maintained by the Cayman 3220-H.
show bridge table
Displays the bridging table maintained by the Cayman 3220-H.
show crash
Displays the most recent crash information, if any, for your Cayman
3220-H.
show dhcp agent
Displays the DHCP relay-agent leases being administered by your
Cayman 3220-H.
show dhcp client
Displays the DHCP address information being used by your Cayman
3220-H for each WAN interface.