User`s guide

Cayman 3220-H User’s Guide Using the Command Line Interface
December 2000 4-1
4 Using the Command
Line Interface
 Overview
 About Root Commands
 About CONFIG Commands
 CONFIG Commands
Overview The Cayman 3220-H operating software includes a command line
interface (CLI) that lets you monitor and configure your Cayman
3220-H over a Telnet or console connection. You can use the
command line interface to enter and update a Cayman 3220-H’s
configuration settings, monitor its performance, and restart it.
Starting and
Ending a CLI
Session
You can open a command line interface session by opening a Telnet
connection from a workstation on your network or by connecting a
terminal to the console port on the Cayman 3220-H.
Connecting from Telnet
You initiate a Telnet connection by issuing the following command
from an IP host that supports Telnet (or a personal computer running
a Telnet application such as NCSA Telnet).