User`s guide

Cayman 3220-H User’s Guide Configuring Your Cayman 3220-H
December 2000 3-53
Figure 3-16 Pinhole Configuration Window
To configure pinhole settings:
1. Enter the number identifying the port used by the
Cayman 3220-H to listen for Web-based configuration
connection requests in the Web-HTTP Port field.
If you set up a NAT pinhole for HTTP traffic (port 80), enter a
number other than 80 in this field.
After you have made this change, you will need to use this port
number to open a Web connection to the Cayman 3220-H. For
example, if you change the Web-HTTP port to 1080 on a Cayman
3220-H using its default IP address (192.168.1.254), you would
open a web connection to the device by entering the URL
http://192.168.1.254:1080.
2. Enter the number identifying the port used by the router
to listen for Telnet-based configuration connection
requests in the Telnet Port field.
If you set up a NAT pinhole for Telnet traffic (port 23), enter a
number other than 23 in this field.