User`s guide

Cayman 3220-H User’s Guide Configuring Your Cayman 3220-H
December 2000 3-17
 Relay-agent – Cayman 3220-H forwards DHCP requests and
responses to a remote DHCP server.
4. If you chose Server in Step 3, enter the first IP address the
Cayman 3220-H should assign for Dynamic Host Control
Protocol clients in the Start Address field.
The default starting IP address is 192.168.1.1.
5. If you chose Server in Step 3, enter the last IP address the
Cayman 3220-H should assign for Dynamic Host Control
Protocol clients in the End Address field.
The default ending IP address is 192.168.1.254.
6. If you chose Server in Step 3, specify the default duration
for DHCP leases in the Lease Time field.
Enter the lease duration in day:hour:minute:second
(DD:HH:MM:SS) format. The default duration for DHCP leases is
one hour (00:01:00:00).
7. If you chose Relay-agent in Step 3, specify the IP address
the remote DHCP server to which your Cayman 3220-H
will relay Dynamic Host Control Protocol address
requests in the Server Address field.
8. Click the Save button to store your modified
configuration in the Cayman 3220-H memory.
9. Click the Restart Cayman-DSL button on the Cayman
3220-H Home Page to restart your Cayman 3220-H with its
new configuration.
Entering ATM
Settings
The ATM Configuration window lets you configure as many as eight
virtual circuits on the Cayman 3220-H ATM connection.
To display the ATM Configuration window (Figure 3-6), click the DSL
Port (WAN) button on the Cayman 3220-H Home Page.