User`s guide

Diagnostic Console Cayman 3220-H User’s Guide
B-4 December 2000
If a text string includes spaces or tabs, you must enclose the string
with double quote marks.
Basic Commands The defaults and help commands are especially useful for users
not familiar with the diagnostic console.
defaults
The defaults command sets the EPROM settings in the Cayman
3220-H to their factory default values. After you reset the Cayman
3220-H EPROM values to their defaults, you must save them to
non-volatile storage with the save command.
The default boot settings for the Cayman 3220-H are presented in the
following table.
The default settings cause the Cayman 3220-H to boot from flash if
possible. If the flash image is corrupt or unusable, the Cayman
3220-H tries the BOOTP protocol 10 times to find IP configuration
and a TFTP download server. If the Cayman 3220-H server succeeds
in downloading an image from a TFTP server, it copies the
downloaded image to flash memory.
Setting Explanation
flash on
Use the image in flash memory if possible.
ip 0
The IP address of the Cayman 3220-H has not
been specified. TFTP download will not be
attempted.
bootp on
The Cayman 3220-H will use BOOTP as part
of its autoboot sequence.
autoboot 10
Use autoboot on startup and try 10 times
before giving up.
autoprog
never
Do not reprogram the Cayman 3220-H flash
memory automatically.