User`s guide

Diagnostic Console Cayman 3220-H User’s Guide

B-2 December 2000

Connecting a

Terminal to the

Console Port

To connect your Cayman 3220-H to a terminal or terminal emulator:

1. Turn off the Cayman 3220-H.

2. Plug one end of the serial cable into the maintenance

console port on the Cayman 3220-H back panel.

3. Connect the other end of the serial cable to the serial port

on your terminal (or terminal emulator) or the modem

port of your computer.

4. Turn on the terminal or run the terminal emulator

program on your computer.

You should use the following settings to conﬁgure your terminal

emulation session:

Setting Set To

Speed 9600 bps

Parity None

Databits 8

Stopbits 1

Duplex Full

9VDC

DSL

MAINTENANCE

CONSOLE

To Your

Terminal or

Terminal Emulator