User`s guide

Cayman 3220-H User’s Guide Monitoring Your Cayman 3220-H
December 2000 5-17
Using the
Diagnose Utility
The Diagnose utility runs a series of internal checks and loopback
tests to verify network connectivity over each interface on your
Cayman 3220-H. To run the Diagnose utility, click the Diagnose
button on the Monitor window.
Figure 5-16 Diagnose Utility Window
The Diagnose window displays the results of each test as the utility
runs. If one test is dependent on another, the Diagnose utility
indents its entry in the Diagnose window. For example, the Diagnose
utility indents the Check IP connect to Ethernet (LAN) entry, since
that test will not run if the Check Ethernet LAN Connect test fails.
Each test generates one of the following result codes:
PASS The test was successful.
FAIL The test was unsuccessful.
SKIPPED The test was skipped because a test on which it
depended failed.
PENDING The test timed out without producing a result. Try
running the test again.