User`s guide

Using the Command Line Interface Cayman 3220-H User’s Guide
4-46 December 2000
set snmp sysgroup contact contact_info
Identifies the system contact, such as the name, phone number,
beeper number, or email address of the person responsible for the
Cayman 3220-H. You can enter up to 256 characters for the
contact_info argument. You must put the contact_info argument
in double-quotes if it contains embedded spaces.
set snmp sysgroup location location_info
Identifies the location, such as the building, floor, or room number,
of the Cayman 3220-H. You can enter up to 256 characters for the
location_info argument. You must put the location_info
argument in double-quotes if it contains embedded spaces.
System Settings You can configure system settings to assign a name to your Cayman
3220-H and to specify what types of messages you want the
diagnostic log to record.
set system name name
Specifies the name of your Cayman 3220-H. Each Cayman 3220-H is
assigned a name as part of its factory initialization. The default name
for a Cayman 3220-H consists of the word “Cayman-DSL” and the
serial number of the device; for example, Cayman-DSL810700. A
device name can be 1-16 characters long and cannot include spaces
or special characters. Once you have assigned a name to your
Cayman 3220-H, you can enter that name in the Open Location text
field of your browser to open a connection to your Cayman 3220-H.
set system diagnostic-level level
Specifies the types of log messages you want the Cayman 3220-H to
record. All messages with a level number equal to or greater than the
level you specify are recorded. For example, if you specify set system
diagnostic-level 3, the diagnostic log will retain high-level
informational messages (level 3), warnings (level 4), and failure
messages (level 5).
Use the following values for the level argument: