User`s guide

Using the Command Line Interface Cayman 3220-H User’s Guide
4-42 December 2000
set PPP module vccn port-authentication chap-secret secret
Specifies the CHAP secret for CHAP authentication. The secret
argument is 1-32 alphanumeric characters. The information you
enter must match the CHAP secret used by the PPP peer.
set PPP module vccn port-authentication pap-option
{ on | off }
Specifies whether PAP authentication is enabled for a port. By
default, PAP authentication is turned off. PAP authentication must be
enabled before you can enter other PAP information. If you disable
PAP authentication and save the modified configuration, your
Cayman 3220-H retains its PAP settings.
set PPP module vccn port-authentication pap-name pap_name
Specifies the name the Cayman 3220-H sends in a PAP response
packet. The pap_name argument is 1- 32 alphanumeric characters.
The information you enter must match the PAP username configured
in the PPP peer's authentication database.
set PPP module vccn port-authentication pap-password
password
Specifies the password the Cayman 3220-H sends when a PPP peer
sends a PAP authentication request. The password argument is 1-32
alphanumeric characters. The information you enter must match the
PAP password used by the PPP peer.
Configuring Peer Authentication
You can specify that your Cayman 3220-H will use PAP, CHAP, or both
to authenticate a remote peer as a PPP link is being completed.
Perform the following steps to specify how your Cayman 3220-H
should authenticate remote peers.