User`s guide

Using the Command Line Interface Cayman 3220-H User’s Guide

4-22 December 2000

You cannot bridge virtual circuits that use IP framing.

set bridge option {on | off }

Enables or disables bridging services in the Cayman 3220-H. You

must enable bridging services within the Cayman 3220-H before you

can enable bridging for a speciﬁc interface.

set bridge ethernet option { on | off }

Enables or disables bridging services for the Ethernet interface.

set bridge dsl vccn option { on | off }

Enables or disables bridging services for the speciﬁed virtual circuit.

using Ethernet framing.

set bridge wan vccn option { on | off }

Enables or disables bridging services for the speciﬁed virtual circuit

using PPP framing.

set bridge interwan-bridging { on | off }

Enables or disables bridging between virtual circuit connections.

DHCP Settings As a Dynamic Host Control Protocol (DHCP) server, your Cayman

3220-H can assign IP addresses and provide conﬁguration

information to other devices on your network dynamically. A device

that acquires its IP address and other TCP/IP conﬁguration settings

from the Cayman 3220-H can use the information for a ﬁxed period

of time (called the DHCP lease).

set dhcp option { off | server | relay-agent }

Enables or disables DHCP services in the Cayman 3220-H. You must

enable DHCP services before you can enter other DHCP settings for

the Cayman 3220-H.

If you turn off DHCP services and save the new conﬁguration, the

Cayman 3220-H clears its DHCP settings.