Specification Sheet

© All copyright and other property in this document is reserved by Cavity Sliders USA Inc. Details and specifications are subject to change without notice.
Whilst all care is taken to ensure the accuracy of all information, no responsibility will be accepted for any errors or omissions. ® CAVILOCK is a Registered Trademark.
CAVILOCK® CL400® ADA OFFSET (O.D. 2017). 61225 - 11.2017
Dimensions
31/4” (81)
71/8” (181)
Finish Options
Other finish options available on request.
(Note: Longer lead times and additional surcharges may apply.)
Configuration Options
Drawings & pictures are not to scale. Colors shown may not accurately represent product All dimensions in inches (and mm).
Oil Rubbed
Bronze
Satin Nickel
Passage Privacy Emergency
Release
Bi-Parting
(Passage or Privacy)
Satin Chrome Chrome
Cavity Sliders USA Inc.
548 Finney Ct
Gardena
CA 90248
T [phone]
F [phone]
E [e-mail]
Another quality product from:
www.cavitysliders.com
High quality
products designed
in New Zealand
Easy to use - no tight
pinching or twisting
of the wrist.
Patented magnetic
functionality.
Striker sits flush with
closing jamb.
Design Features & Options
See at a glance
whether a room is
occupied.
Matches other
hardware in the
CL400 range.
Passage Privacy Bi Parting mate
emergency
35/8” (92)
17/8”
43/8” (111)
(48)
(34, 40, 46, 52mm)
1-3/8”
1-5/8”
1-13/16”
2”
ADA
Function Finish Door thickness Handing Configuration
Single Door Satin Chrome 1-3/8” to 1-9/16”
Bi-Parting Door Satin Nickel 1-5/8” to 1-3/4”
Passage
(Non Latching) Bright Chrome 1-13/16” to 2”
Passage
(Mag Latching) ORB 2-1/16” to 2-1/4”
Privacy Locking Special Order
Stand looking into the pocket as
shown
Handing must be determined at time of manufacture and cannot be
altered on site. Careful selection of handing options is required at
time of order. See diagram for determining handing of functions.
Blank
Snib
Emerg.
Blank
Snib
Emerg.
LH RH
Selection Procedure To order, ensure you have the following information ready:
Passage Privacy Bi Parting mate
emergency
Passage Privacy Bi Parting mate
emergency
Passage Privacy Bi Parting mate
emergency
- Offset
In line with ADA Standards for Accessible Design,
the CL400 ADA Magnetic has a handle that is easy
to grasp with one hand and does not require tight
grasping, tight pinching or twisting of the wrist.
The opening force required to operate the unit is
2.5lbf (11.1N), which is under the 5lbf threshold for
ADA compliance.
(56.5mm)
(149mm)
5
7
/
8”
2
7
/
32”
7
/
16”
(11.25mm)
(176mm)
6
15
/
16”
Door Cutout
IMPORTANT: Operable
parts of hardware must
be mounted 34” (865mm)
min. and 48” (1220 mm)
max. above finished floor
to meet ADA guidelines.
The clear width of the
door opening must be a
minimum of 32”. Always
check State and Federal
guidelines relating to the
specific project.