Reference Guide

6
The CL400 Bi-Parting set is suitable for use where
two doors meet in the middle. Passage, Privacy and
Key Locking configurations are available.
The positive hold close action brings the doors
together smoothly and holds them together until
ready to open.
Note: Privacy and Key Locking configurations are
not suitable as a high security option when used in
a Bi-Parting door setup.
Bi-Parting (Double Door) Set
Selection Procedure
Matching Handle Set
- Passage / Privacy
Matching Handle Set
- Key Locking
Select the functionality and finish required from
the table below to choose your Bi-Parting Pack.
A matching handle set will automatically be
supplied to suit your selection.
Options include
Passage, Privacy and
Key Locking.
Bi-Parting hardware
matches other
hardware in the
range.
Moving parts sit flush
until the door closes
to minimize wear.
Design Features & Options
Configurations
Doors slide flush
back into the pocket.
Available in a range
of finishes.
Suits doors from
1-3/8” to 2-1/4” thick.
Passage - non latching Passage - latching Privacy Key Locking
8 - CL400 Bi-Parting Privacy
Emergency/Snib option.
Satin Nickel finish.
Snib both sides
Snib one side
Snib/Emergency
Key both sides
Key one side
Function Door thickness Finish Handing Configuration
Bi-Parting Passage 1-3/8” to 1-9/16” Satin Chrome
Bi-Parting Passage
(Latching)
1-5/8” to 1-3/4” Matte Chrome
1-13/16” to 2” Bright Chrome
Bi-Parting Privacy 2-1/16” to 2-1/4” Satin Nickel
Bi-Parting Key Oil Rubbed Bronze
Special Order
Bi-Parting Privacy Snib One Side and Key One Side handles are
supplied with the Snib or Key on the right hand side only.
Stand looking into the pocket as
shown
Dimensions shown in inches (and millimeters).