Reference Guide
5
1
1
/
16”
(27mm)
Function
(see handing)
Door thickness Finish Handing Configuration
Key/Snib
1-3/8” to 1-9/16” Satin Chrome
Key/Key
1-5/8” to 1-3/4” Matte Chrome
Key One Side
1-13/16” to 2” Bright Chrome
2-1/16” to 2-1/4” Satin Nickel
Oil Rubbed Bronze
Special Order
Selection Procedure To order, ensure you have the following information ready:
Stand looking into the pocket as
shown
Handing is determined at time of manufacture and cannot be
altered on site. Careful selection of handing options is required at
time of order. See diagram for determining handing of functions.
Key
Snib
Blank
Key
Snib
Blank
LH RH
The CL400 Key Locking option is suitable for
residential or light commercial use in internal
situations where medium security is required.
It incorporates a single or double Euro Profile
cylinder with Schlage C Keyway. All Key Locking
handles come with a raised shroud as standard
for increased security.*
Key Locking
Technical Detail
6 - CL400 Key/Key option.
Satin Nickel finish.
7 - CL400 Key/Snib option.
Oil Rubbed Bronze finish.
KEY FRONT PLATE
Design Features & Options
Options include:
Key/Snib, Key/Key or
Key one side.
Raised shroud
included as standard
for increased security.
Key Locking hardware
matches Passage and
Privacy hardware.
Door slides flush back
into the pocket.
Magnetic latch
ensures door doesn’t
roll away from the
closing jamb.
Moving parts sit flush
until the door closes
to minimize wear.
Available in a range
of finishes.
Suits doors from
1-3/8” to 2-1/4” thick.
* Not suitable where high security is a requirementDimensions shown in inches (and millimeters).
7
1
/
8”
(181mm)
3
25
/
64”
(86mm)
2
1
/
16”
(52.55mm)
55
/
64”
(22mm)
6
59
/
64”
(176mm)
49/64”
(19.5mm)
1-3/8”
1-5/8”
1-13/16”
2”
2
3
/
8”
(60.5mm)