Reference Guide

ManualsBrandsCavilock ManualsHardwareMagnetic Keyed Entry Pocket Door Lock Set with RH Snib/LH Key for 1-3/8 Inch Thick Doors

1 - CaviLock CL400 Passage

(non latching) handle in Satin

Chrome ﬁtted to a timber door.

Watch the CL400 Magnetic

video on YouTube

High quality

door hardware

for most

interior sliding

applications.

The CAVILOCK

CL400 Magnetic is a range of modern

architectural hardware for sliding doors. The range

covers Passage, Privacy, Bi-Parting and Key Locking

conﬁgurations.

This high quality, wrap around handle is easy to ﬁt,

requiring no complicated mortise cutout.

Bi-Parting (Double Doors)

Available in a range

of ﬁnishes, the CL400

Magnetic is suitable for

both residential and light

commercial use.

Passage

Key

Locking

Privacy

Snib

Summary of content (8 pages)

PAGE 1
Passage The CAVILOCK® CL400 Magnetic is a range of modern architectural hardware for sliding doors. The range covers Passage, Privacy, Bi-Parting and Key Locking configurations. Privacy Snib This high quality, wrap around handle is easy to fit, requiring no complicated mortise cutout. High quality door hardware for most interior sliding applications. Key Locking Available in a range of finishes, the CL400 Magnetic is suitable for both residential and light commercial use.
PAGE 2
Design Features Architectural styling with a wide range of configurations and finish options available Positive grip for heavy doors No on site alteration of handle is required Front edge incorporates a finger hole to retrieve door from the pocket Reliable, high quality components Suitable for pocket or barn slider style doors* Moving parts sit flush until the door closes to minimize wear Step by step installation instructions with detailed diagrams and templates are included Patented magnetic catch
PAGE 3
Passage Latching / Non-latching The CL400 is a stylish architectural option for passage handles. Designed to complement the privacy and locking range, this handle features a positive hold close action to ensure the door doesn’t bounce off the closing jamb. Design Features & Options Passage hardware matches Privacy and Key Locking hardware. Magnetic latch ensures door doesn’t roll away from the closing jamb. Door slides flush back into the pocket. Available in a range of finishes.
PAGE 4
Privacy The CL400 Privacy option matches the other configurations in the range. The magnetic latching feature ensures the door doesn’t roll open - even if the snib is not engaged. Design Features & Options Options include: Snib Both Sides, Snib One Side, or Snib/Emergency. Magnetic latch ensures door doesn’t roll away from the closing jamb. Privacy hardware matches Passage and Key Locking hardware. Moving parts sit flush until the door closes to minimize wear. Door slides flush back into the pocket.
PAGE 5
Key Locking The CL400 Key Locking option is suitable for residential or light commercial use in internal situations where medium security is required. It incorporates a single or double Euro Profile cylinder with Schlage C Keyway. All Key Locking handles come with a raised shroud as standard for increased security.* Design Features & Options Options include: Key/Snib, Key/Key or Key one side. Raised shroud included as standard for increased security.
PAGE 6
Bi-Parting (Double Door) Set The CL400 Bi-Parting set is suitable for use where two doors meet in the middle. Passage, Privacy and Key Locking configurations are available. The positive hold close action brings the doors together smoothly and holds them together until ready to open. Note: Privacy and Key Locking configurations are not suitable as a high security option when used in a Bi-Parting door setup. Design Features & Options Options include Passage, Privacy and Key Locking.
PAGE 7
Technical Detail Face Plate Door Cutout Four different face plate widths are available, to suit doors from 1-3/8” to 2-1/4” thick. The CL400 requires a simple door cut out. Complete instructions and templates are supplied with every handle. 111/32” (34mm) 137/64” 113/16” (40mm) 23/64” (46mm) (52mm) 7/16” (11.
PAGE 8
© All copyright and other property in this document is reserved by Cavity Sliders USA Inc. Details and specifications are subject to change without notice. Whilst all care is taken to ensure the accuracy of all information, no responsibility will be accepted for any errors or omissions. Drawings & pictures are not to scale. Dimensions shown in inches (and millimeters). Colors shown may not accurately represent product. Timber lock blocks shown do not depict actual doors.