Assembly Instructions

Never move the grill while it is use.
Wait until the grill is completely cold before moving it.
When the grill is not in use, ensure that the gas cylinder is properly closed.
When not using your grill for a long period of time, store your product in a place
where it cannot be damaged by the elements and if possible, away from any
humidity.
If you need help, have missing or damaged parts, or have any questions, please email us at
sales@e-pgmarket.com or call us toll-free at 510-857-9138 (9a-5p PST, Monday-Friday)
We expressly point out that we do not provide any warranty if the device is modified or
used in an inappropriate manner or different to the instructions within this manual.
Burner won’t light after
turning and pushing the
knob
Electrode deposited with
cooking residues
Use clean swab and rubbing alcohol
Electrode damaged Replace electrode
Electrode wires are loose
or have fallen off
Reconnect or replace with new
electrode assembly and wires
Orifice blocked Check the orifice for blockage
Battery is dead Replace battery
Low heat with dial in
maximum position.
Gas hose bent or kinked Straighten hose
Burner or orifice blocked. Clear blockage
Low gas pressure Tank level could be low
Grill not preheated Preheat the grill for 15-20 minutes
Flare-up
Excessive meat fat Remove fat before grilling
Overly high temperature Adjust temperature dial down
Grease deposits Clean
Flame out Overly high winds Find a less windy place
Flame lifting Overly high gas pressure Call a gas dealer or replace tank
Flashback Burner port blocked Clean
12
The symbol here and on the product means that this product is classed as Electrical or Electronic
Equipment and should therefore not be disposed with other household or commercial waste at the
end of its useful life.
Contact local authorities for information on the correct disposal of Electrical or Electronic equipment.