Instruction manual

CAUH PASSIO SERIES
4
Before you press start, be poised to turn your CAUH’s power switch off and on quickly. But, wait until the MFGTool
program instructs you to do so! The very bottom of the “Operation Information” window (on the right-side of the
MFGTool interface) will give you specic instructions, as well as a log of all of the operations it is currently
performing.
Press Start at the bottom of the MFGTool window. The program will scan for your device rst. Then, it will begin
installing the special encryption rmware. Keep an eye on the bottom of the Operation Information window.
Within a few seconds, the Operation Infor-
mation window will say this, “Please [Power
Off] then [Power On] for 3.5” HDD.”
Quickly turn the CAUH power switch off
and back on.
“Autoplay” may appear and attempt to access
your drive. Ignore and close these windows.
8)
9)
10)
11)
B
2
CHAPTERINSTALLATION GUIDE
SOFTWARE INSTALLATION AND ENCRYPTION (Cont’d)