Instruction manual
CAUH PASSIO SERIES
2
There are two ways to congure your CAUH:
Un-encrypted
Encrypted
UN-ENCRYPTED:
Un-encrypted use is the sole choice for Mac users, or casual users who do not plan on storing sensitive data. To install the
drive in un-encrypted mode, simply connect the drive according to the included Quick Start Guide. Mac users will need to
format the drive in Disk Utility. Windows users should see the drive in (My) Computer and Disk Management, and Initialize or
Partition the drive if need be.
!Encryption is only available for users of Windows XP/Vista/7!
ENCRYPTED:
Encrypting the CAUH requires a more advanced setup procedure than a standard external drive. As a result, we ask that you
please read the installation guide completely before you attempt to encrypt the CAUH. The Encryption process will be divided
into 3 sections:
A) Software and Hardware Preparation
B) Software Installation and Encryption
C) Password Creation
Make sure that you are logged into Windows as an Administrator. Then, insert the resource CD into your Windows
computer.
Copy the entire “CAUHCD” folder from the CD onto your desktop.
Open the folder, and carefully
take notice of the location of
these 5 les:
a. ”MFG Tools Setup”
b. “CAUH.bta”
c. “CAUH.909”
d. “CAUHHD.”
e. “AUTORUN”
Now plug your Cavalry power
supply into the nearest outlet,
and plug the other end into your
CAUH. Turn the CAUH on.
Plug the USB cable into both the
CAUH and your Windows
computer.
1)
2)
3)
4)
5)
A
2
CHAPTERINSTALLATION GUIDE
INSTALLATION STEPS
SOFTWARE AND HARDWARE PREPARATION