Use and Care Guide
Tools needed:
Page 3
Level
Flat-blade
and Phillips
screwdrivers
Powered
screwdriver
or drill
Measuring
tape
Utility knife
Marker or
pencil
Table of Contents
Adjustable Wrench
INSTALLATION
Tools needed....................................................3
Parts supplied...................................................4
Venting requirements.......................................5
Mount heights & clearance...........................5-6
Calculating vent system length.......................6
Venting methods..............................................7
Electrical requirements....................................8
Preparation......................................................9
Installation................................................10-12
Range hood operations............................13-22
USE AND CARE
Troubleshooting...........................................23
Use and care information.............................24
Specications..............................................24
MAINTENANCE
Cleaning...............................................25
Replacing lter & light bulb....................25-26
WARRANTY
Coverage & exceptions.................................27
Disclaimer & contact information..................28