Use and Care Guide
Tools needed:
Page 3
Level
Flat-blade and
Phillips screw-
drivers
Powered
screwdriver
or drill
Measuring
tape
Utility knife
Marker or
pencil
Table of Contents
INSTALLATION
Tools needed....................................................3
Parts supplied...................................................4
Venting requirements.......................................5
Mount heights & clearance...........................5-6
Calculating vent system length.......................6
Venting methods..............................................7
Electrical requirements....................................8
Preparation......................................................9
Installation................................................10-11
Range hood operations............................12-23
USE AND CARE
Troubleshooting...........................................24
Use and care information...............................25
Specications..............................................25
MAINTENANCE
Cleaning...............................................26
Replacing lter & light bulb....................26-27
WARRANTY
Coverage & exceptions.................................28
Disclaimer & contact information..................29