Use and Care Guide

Page 11
Store excess wires in the wiring box.6.
Install both chimneys and tighten screws to secure the 7.
lower chimney to the range hood as shown in Figure
5.
To avoid scratching the chimney, extend the upper 8.
chimney slowly and carefully to the chimney-mount-
ing bracket and tighten screws as shown in Figure 6.
Turn power ON in control panel. Check all lights and 9.
fan operations.
Make sure to leave this Installation Guide for the ho-10.
meowner.
Installation (Continued)
Figure 3
Figure 4
Figure 6
Figure 5
Figure 2