User manual

Operating Instructions
Legend™ 1200E Spot User Manual 21 8/13/2009 10:57 AM
Error Messages
When the error alert icon appears on the home screen, press
<ENTER> to view the error information. Please see the chart
below for further explanation.
Once an error has been resolved, you may perform a fixture reset to remove
the message from the home screen.
MESSAGE
DESCRIPTION
Lamp Startup Fail
Failed to strike the lamp after 1 minute (1 attempt).
Lamp Hot Protection
The lamp has reached a temperature between 105° C and 109° C; the lamp will operate
at half power while at these temperatures to attempt to bring the temperature to normal
levels
Lamp Hot Power Off
The lamp has reached 110° C or higher, and has been turned off as a safety precaution
Maintenance Fixture
The user-selected time for maintenance has been reached
Fan1 Error
Fan 1 has malfunctioned
Fan2 Error
Fan 2 has malfunctioned
Fan3 Error
Fan 3 has malfunctioned
Fan4 Error
Fan 4 has malfunctioned
Fan5 Error
Fan 5 has malfunctioned
Fan6 Error
Fan 6 has malfunctioned
CPU-B Error
Communication malfunction with CPU-B
CPU-C Error
Communication malfunction with CPU-C
CPU-D Error
Communication malfunction with CPU-D
CPU-E Error
Communication malfunction with CPU-E
CPU-F Error
Communication malfunction with CPU-F
CPU-G Error
Communication malfunction with CPU-G
CPU-H Error
Communication malfunction with CPU-H
Pan Home Sensor Error
The pan has failed to reset/home properly; check sensor, magnet, or pan lock
Pan Encode Error
The pan encoding/optical sensor has malfunctioned
Tilt Home Sensor Error
The tilt has failed to reset/home properly; check sensor, magnet, or tilt lock
Tilt Encode Error
The tilt encoding/optical sensor has malfunctioned
Color 1 Reset Fail
The color wheel has failed to reset/home
Cyan Reset Fail
The dichroic shutter for cyan has failed to reset/home
Magenta Reset Fail
The dichroic shutter for magenta has failed to reset/home
Yellow Reset Fail
The dichroic shutter for yellow has failed to reset/home
3200K Filter Reset Fail
The dichroic shutter for 3200 K CTO Filter has failed to reset/home
Gobo 1 Reset Fail
The Gobo wheel 1 has failed to reset/home
R-Gobo 1 Reset Fail
The Gobo wheel 1 rotation has failed to reset/home
Gobo 2 Reset Fail
The Gobo wheel 2 has failed to reset/home
R-Gobo Reset Fail
The Gobo wheel 2 rotation has failed to reset/home
Iris Reset Fail
The motorized iris has failed to reset/home
Effect Reset Fail
The effect/prism wheel has failed to reset/home
R-Effect Reset Fail
The effect/prism rotation has failed to reset/home
Frost Reset Fail
The frost filter has failed to reset/home
Focus Reset Fail
The focus has failed to reset/home
Zoom Reset Fail
The zoom has failed to reset/home
Memory Initial Reset Fail
Memory malfunction or miscommunication; chip: 24C256
Temperature Sense Fail
The temperature sensor is not responding
Lamp On Over 700 Hour
The lamp has been operating for over 700 hours, please consult the lamp manufacturer’s
rating for the lamp. This can be reset in the control panel of the fixture