User manual

Operating Instructions
Legend™ 1200E Spot User Manual 18 8/13/2009 10:57 AM
Error Alert
Icon
Internal Fixture
Temperature
Current DMX
Address
DMX Operating
Mode
Operation
Home Screen
By default, when the fixture is operating under normal circumstances, the display
screen will list critical information. Please see the diagram, along with the set of
instructions, below for further explanation.
DMX Operation
This is the explanation of how to setup the fixture to operate with a DMX controller.
Please see the set of instructions below for further explanation.
1. Press <MENU>.
2. Select: DMX Functions>DMX Address>.
3. Rotating the <JOG WHEEL>, select a DMX address.
4. Press <ENTER>.
Resetting the
Fixture
If there is an operation error in this fixture, a fixture reset will often correct such a
problem. Please see the set of instructions below for further explanation.
1. Press <MENU>.
2. Select: Fixture Test.
3. Rotating the <JOG WHEEL>, select Manual Test or Auto Test.
4. Press <ENTER>.
Factory Default
Reset
You may reset all settings to the factory default from the LCD display. Please see
the set of instructions below for further explanation.
1. Press <MENU>.
2. Select: Special Function<Factory Settings.
3. Rotating the <JOG WHEEL>, select Yes or No.
4. Press <ENTER>.
Please be aware that this action will cause all settings to revert to the state
they were at when the fixture shipped from the manufacturer.
This will not affect the home position adjustments.