User manual

Setup
Legend™ 1200E Spot User Manual 11 8/13/2009 10:57 AM
Mounting
Orientation
Only mount this fixture in a horizontal position, either hanging or standing, as
indicated in the diagram below. Be sure that there is adequate room for
ventilation and for the pan/tilt motion of the fixture. Doing otherwise may void
this fixture’s warranty and cause damage to the fixture.
Rigging
The Legend™ 1200E Spot ships in a flight case specially designed to fit the fixture.
There are two omega brackets with clamps included in the flight case.
When selecting an installation location, consider ease of access to the fixture for
operation, lamp replacement, programming adjustment(s) and routine
maintenance.
Never mount the fixture in places where rain, high humidity, extreme temperature
changes or restricted ventilation may affect it.
Make sure that the location where you are mounting the fixture can support its
weight. Please see the “Technical Specifications” section of this manual for the
weight requirement of this fixture.
Omega brackets
with clamps
Standing position
Hanging position
Safety
Standing position