Instructions / Assembly

STEP 9
Attach towel bar to side panel with 1” #8 screws/washer from
inside one panel.
2 used in this step
1” Phillips Flat Head #8 Screw
2 used
in this step
3/16” Flat Washer
STEP 10
A. Tap/insert ONE 1 1/2” pin into each end of both doors. DON’T OVERDRIVE PINS! Pins should
stick up about 1/2” when seated.
B. Attach the doorspacer to the left door with 5/8” #8 screws. The spacer has a space at the top to
allow magnet clearance and is almost ush with the bottom of the door. Countersunk holes out.
C. Attach the magnet plate (may be stuck to magnet! ) with the 1/2” #4 screw to the top of the right
door. Bumps go toward the wood.
D. Attach door handles with 7/8” truss head machine screws.
1 1/2” Pin
1/2” #4 Screw
7/8” Machine Screw
5/8” #8 Screw
Magnet Plate
Handle