Manual

3/4” pin
STEP 6
Take the 2 front braces and tap/insert one 3/4” steel pin into each
of both braces until seated. About 3/8” will stick out when seated.
OK if loose.
3/4” pin
5/8” #8 Screw
1 1/2” pin
1/2” #4 Screw
7/8” Truss Head Bolt
STEP 7
A. Tap/insert one 1 1/2” pin
into each end of both doors.
DON’T OVERDRIVE PINS!
Pins should stick up about
1/2” when seated. O.K. if
loose.
B. Attach the door spacer
to the left door with 5/8” #8
screws. The spacer has a
space at the top to allow
magnet clearance and is
almost ush with the bottom
of the door.
C. Attach the magnet plate
(may be stuck to the magnet!)
with the small at head screw
to the top of the right door.
Bumps toward wood.
D. Attach door handles with
two 7/8” truss head bolts.
Not Used
Not Used
Right Door
Inside View
Left Door
Inside View