Instructions / Assembly
1” Phillips Flat Head #8 Screw
2 Used in this step
1 1/4” Phillips Flat Head #8 Screw
3 Used in this step
3/16” Flat Washer
4 used in
this step
STEP 14
A. Attach the backsplash to the back edge of
the table top with 1 1/4” #8 screws in three
places as shown.
STEP 15
A. Attach the towel bars to the side panels
with two 1” #8 screws from inside the panel.
Place a washer over the screw so that the
head won’t pull through the side panel.