Manual

STEP 10
Invert unit or lay the unit on its back
to insert the wheels. USE A FRIEND
TO HELP WITH THIS PROCESS.
A. Insert and tap caster sockets with
hammer until the teeth grab the
wood. DONT POUND SOCKET
FLAT OR CASTER SHAFT WILL
NOT ENTER.
B. Insert casters and seat by pushing
straight downward with heel of your
hand, or tap into place with a
hammer. Dont be afraid to give them
a good downward whack on the solid
metal part of the caster!
C. Locking wheels usually go on
front.
STEP 11
A. Upright unit. USE A FRIEND TO HELP WITH THIS PROCESS.
B. Attach Towel Bars to the Side Panels with 1 1/4 #8 screws from inside each Side Panel.
ILLUSTRATION 11
ILLUSTRATION 10
1-1/4 Phillips Flat Head #8 Screw
4 Used in this step
1-1/4 #8 screws