Instruction Manual

STEP 14
Add Drawer and Cutting Boards
Slide the Drawer into the front
of the cart then slide the Slide
Out Cutting Boards into the
sides of the cart. Drawer will
push in halfway
and seem to stop.
It is O.K. to apply
greater pressure to
align ball bearings
properly then glides
will work smoothly.
Then tap in the 5/8 Wooden
Plugs into the holes in the Legs.
Tip: Give Drawer/Boards a hard
shove inward to seat.
STEP 13
Insert Shelves
Slide in the Bottom
Shelf and t it over
the Bottom Pins.
Then slide in the
Middle Shelf
(with edge
banding) and
t it over the
middle set of
Pins.