Instruction Manual

Lay Top upside-down on at smooth surface and screw on the “L” brackets using 5/8” #6 at
head screws as in illustration. Attach the “L” bracket to the top using the hole, not the slot on the
“L” bracket. Then ip assembled unit upright and attach the Top to the assembled unit using 5/8”
#6 at head screwsthrough the “L” brackets into the pilot holes in the top side brace
5/8” #6 Flat Head Screws
STEP 12
Tabletop
STEP 11
Castors and Shelf Pins
A. Upright the unit.
B. Insert (6) 1 1/2”
pins into the pin holes
at the bottom (1 in
each leg and 1 in
each bottom brace).
The Middle Shelf has
3 adjustable heights,
determine which height
to use and insert the
1 1/2” pins into the
appropriate holes in
the legs, as the Middle
Shelf is adjustable.
1 1/2” pin