4847 Dual Motor Lift Chair Setup and Operation
The easiest and safest way to open the Carton is to reverse the carton and remove the staples from the bottom of the Carton. Once the staples are removed and the flaps are folded back remove the support in the front of the carton. Remove the chair from the carton by laying the carton on its back and pulling the chair towards you.
Remove the plastic wrap from the arm assembly and the back. Place the back into the seat with the back positioned with the back open at the rear. Align the male and female KD brackets, and push down firmly, be sure that the locking clips are in place..and firmly locked, pull up on the back, the back should not be able to be removed without opening the locking tabs.
Roll the chair onto its arms, underneath the chair there is a red bag with the power supply, cut the white zip tie securing the bag to the lift frame. Remove the power supply from the bag (dispose of the bag properly).
Dual Motor Power Lift Chair Operation The two “Back” buttons allow you to control the recline level of the back of the chair without affecting the seat/ottoman The two “Legrest” buttons allow you to control the seat/ottoman independently without affecting the back of the chair With the chair in the “closed” position, holding the “UP” arrow button will lift the chair providing an easy exit With the chair in the “lifted” position holding the “DOWN” arrow button will lower the chair into its normal closed p
Power Lift Chair Parts and Accessories Dual Motor Lift Frame Transformer Back (Recline) Motor Base (Lift) Motor
