Instruction Manual

9
Click [Update] button to begin updating. Wait until a dialog
appears with the message [Updating complete].
4. After the update is complete, disconnect the
light.
After updated, the light will enter a sleep state.
Click the switch on the light to wake the light.
* For information on operations using CatEyeSYNC™, refer to
the “CatEyeSYNC™ instruction manual”.
Frequently Asked Questions
The firmware update does not finish, or an
alert is displayed.
Try updating the firmware again from the beginning.
* Please make sure the light is fully charged before updating
the firmware.
* Be sure to use the included USB cable when connecting a
light to a PC.
* Do not simultaneously connect any other lights.