Instruction Manual

8
Executing Firmware Updater for CatEyeSYNC™
* The PC must be connected to the Internet.
1. Fully charge the light being used.
Important : Please make sure the light is fully charged
before updating the firmware.
2. Start Firmware Updater for CatEyeSYNC™.
3. Follow the on-screen instructions to connect
the light to a PC and update the firmware.
Important :
•
Be sure to use the included USB cable when
connecting a light to a PC.
•
Do not simultaneously connect any other
lights.
•
Do not power off the PC or disconnect the light
while updating. Doing so may damage the light.