START CATEYE STRADA CC-RD100N Quick Start Click the button and follow the instructions.
Thank you for purchasing our cyclocomputer CATEYE STRADA. This Quick Start Manual explains how to set up the computer and how to install the unit on your bicycle. Please set up the unit according to the specified procedure, then it will be ready for use as a cyclocomputer. Before use, read the instruction manual that comes with the product thoroughly to the end to understand the functions of this unit, and to use it safely in a correct manner.
This PDF contains a movie file. When you click on the movie screen, a message regarding security appears. Click the “Trust in the text” or “Play” button to close the message. Click the screen again to play the movie.
CATEYE STRADA Quick Start Manual Click the item you wish to view.
Operation of buttons Set up the computer by operating the buttons as follows. Check the button position before you start setting up. Back MENU MODE Press the MENU button and the MODE button on the back of the computer.
CATEYE STRADA Quick Start Manual Setting up the computer Clear all data (initialization) Clear all data (initialization) Press the AC button on the back of the computer. After full lighting of the screen, the computer switches to the speed unit setting screen to start setup.
CATEYE STRADA Quick Start Manual Return to Contents Setting up the computer Setting the speed unit Clear all data (initialization) When the MODE button is pressed, either “km/h” or “mph” is selected for the speed unit display. Select the display of your choice. After selecting, press the MENU button to proceed to the next step “Entering the tire circumference”.
CATEYE STRADA Quick Start Manual Return to Contents Setting up the computer Entering the tire circumference Clear all data (initialization) Enter the tire circumference (mm) of your bicycle with 4 digits using the tire circumference reference table. Pressing the MODE button increases the value flashing, and pressing and holding the MODE button moves to the next digit. After entering, press the MENU button to proceed to the next step “Setting the clock display.
CATEYE STRADA Quick Start Manual Return to Contents Setting up the computer Setting the clock display Clear all data (initialization) When you press and hold the MODE button, “24h” flashes. When the MODE button is pressed, either “12h” or “24h” is selected for the clock display. Select the display of your choice. After selecting, press and hold the MODE button to proceed to the next step “Setting the hour”.
CATEYE STRADA Quick Start Manual Return to Contents Setting up the computer Setting the hour Clear all data (initialization) Pressing the MODE button increases the value flashing (“Hour” of the clock). Enter any value. After entering, press and hold the MODE button to proceed to the next step “Setting the minute”.
CATEYE STRADA Quick Start Manual Return to Contents Setting up the computer Setting the minute Clear all data (initialization) Pressing the MODE button increases the value flashing (“Minute” of the clock). Enter any value (Pressing and holding MODE rapidly increases the value). After entering, press the MENU button to switch to the measuring screen.
CATEYE STRADA Quick Start Manual Return to Contents Setting up the computer Now, setup of the computer is completed. Clear all data (initialization) If the bracket and speed sensor are not installed on your bicycle, return to Contents, click “How to install the bracket” and “How to install the speed sensor”, and then install them according to the instructions.
CATEYE STRADA Quick Start Manual Return to Contents How to install the bracket • The Bracket being used in this movie is for wireless products and there is no wire attached. • When you install the bracket band to your bicycle, tighten it so the wire will not be pinched by the stem or handlebar.
Prepare the following parts from the packaged items.
CATEYE STRADA Quick Start Manual Return to Contents How to install the speed sensor Install the speed sensor Install the speed sensor Select the suitable size for the front fork diameter of your bicycle from two different sensor rubber bands. 1Attach the sensor hook to the sensor rubber band, and install it to the right front fork of your bicycle. 2Pass the speed sensor through the sensor rubber band installed.
CATEYE STRADA Quick Start Manual Return to Contents How to install the speed sensor Install the magnet Install the speed sensor Temporarily secure the magnet to the right side spoke of the front wheel spoke. Tighten the magnet to such an extent that it can be moved.
CATEYE STRADA Quick Start Manual Return to Contents How to install the speed sensor Adjust the positions of the speed sensor and magnet Install the speed sensor Adjust the position so that the magnet passes through the SENSOR LINE of the speed sensor. After adjusting, tighten firmly the magnet.
CATEYE STRADA Quick Start Manual Return to Contents How to install the speed sensor Adjust the clearance between the speed sensor and magnet Install the speed sensor Adjust the clearance between the speed sensor and magnet so that it is within 5 mm. When the clearance with the magnet is more than 5 mm, install the speed sensor with 1 to 3 sensor rubber pads in layers.
CATEYE STRADA Quick Start Manual Return to Contents How to install the speed sensor Fixing the wire Install the speed sensor Fix the wire to the front fork with nylon ties. Cut off any excess nylon tie using a nipper.
CATEYE STRADA Quick Start Manual Return to Contents How to install the speed sensor Winding the wire Install the speed sensor Wind the wire around the brake cable. section so that the wire is Caution: Adjust this not stretched when you turn the handle. Now, speed sensor installation is completed. See how to install the bracket, and then complete the installation. When the computer is not set up, return to Contents, click “Setting up the computer”, and follow the instructions.
CATEYE STRADA Quick Start Manual Return to Contents Setting up the computer Tire circumference reference table ETRTO 47-203 54-203 40-254 47-254 40-305 47-305 54-305 28-349 37-349 32-369 40-355 47-355 32-406 35-406 Tire size 12x1.75 12x1.95 14x1.50 14x1.75 16x1.50 16x1.75 16x2.00 16x1-1/8 16x1-3/8 17x1-1/4 (369) 18x1.50 18x1.75 20x1.25 20x1.
