Instruction Manual

9
3. Follow the on-screen instructions to connect
the light to a PC and update the firmware.
Important :
•
Be sure to use the included USB cable when
connecting a light to a PC.
•
Do not simultaneously connect any other lights.
•
Do not power off the PC or disconnect the
light while updating. Doing so may damage
the light.
Click [Update] button to begin updating. Wait until a dialog
appears with the message [Updating complete].
4. After the update is complete, disconnect the
light.
After updated, the light will enter a sleep state.
Click the switch on the light to wake the light.
* For information on operations using CatEyeSYNC™, refer to
the “CatEyeSYNC™ instruction manual”.