Manual

MODE- 1
MODE- 2
MODE-2
MODE-1
51
PW-TR100 : POWER UNIT
Power select
Wheel selection
Tire circumference input
Auto-mode
Sound
Date
Setting clock
Manual odometer input
Speed unit
Defining remote button setting
Cadence zone
Heart rate zone
Heart rate sensor ID
Data file
Data storage
PC Link
Torque
Power select
* For the basic information on
how to use the menu screen, re-
fer to “Configuring main unit”
on page 35.
Menu screen
Operation Guide
S/S/E
S/S/E
S/S/E
Torque
Press the START/STOP/ENTER button to carry out torque measurement per 1/100 second.
Press the START/STOP/ENTER button again to complete measurement.
NOTE: • If the message “Full” appears and measurement stops, this means that there is no re-
maining memory. Check the old data files and delete unnecessary files to free up memory,
referring to “Data Files” on page 47.
• The torque measurement data are recorded as a data file in the same way as data storage.
Therefore, the torque measurement menu is not displayed when the data storage setting is off.
OFF-Power: The torque measurement screen does not appear.
Torque menu screen
Remaining
memory
File No.
Measurable time
Torque measure-
ment screen
Check screen
End
PC link menu screen
Power select menu screen