Manual

MODE- 1
MODE- 2
MODE-2
MODE-1
44
PW-TR100 : POWER UNIT
Power select
Wheel selection
Tire circumference input
Auto-mode
Sound
Date
Setting clock
Manual odometer input
Speed unit
Defining remote button setting
Cadence zone
Heart rate zone
Heart rate sensor ID
Data file
Data storage
PC Link
Torque
Power select
* For the basic information on
how to use the menu screen, re-
fer to “Configuring main unit”
on page 35.
Menu screen
Operation Guide
MODE-2
MODE- 2
• Checking the time in target zone
Press the START/STOP/ENTER button with the “Hear rate zone” menu displayed, the Select
zone No. screen appears; time for keeping the certain heart rate in Zone 1 can be checked.
There are four heart rate zones. The zone number is displayed with its lower and upper limits,
time in zone, and target setting status. To switch the zone, press the MODE-2 button.
NOTE: When the computer is reset, all data for time in zones is reset to zero.
• Turning on/off the target
When the MODE-2 button is pressed with the Select zone No. screen displayed, you can select
whether or not to specify a target (alert setting in this range) for the displayed zone.
The target is set at OFF in the initial setup.
Zone no.
Select zone no.
Lower limit
Upper limit
Time in heart rate zone
Target setting status (On/Off)
Set target
NOTE: Targets can be set for more than one zone.
When using more than one target zone, the computer will only alert you if you are outside
ALL your target zones.