Manual

MODE- 1
MODE- 2
MODE-2
MODE-1
41
PW-TR100 : POWER UNIT
Power select
Wheel selection
Tire circumference input
Auto-mode
Sound
Date
Setting clock
Manual odometer input
Speed unit
Defining remote button setting
Cadence zone
Heart rate zone
Heart rate sensor ID
Data file
Data storage
PC Link
Torque
Power select
* For the basic information on
how to use the menu screen, re-
fer to “Configuring main unit”
on page 35.
Menu screen
Operation Guide
S/S/E
MODE- 1
MODE- 1
S/S/E S/S/E
MODE- 1
On
OFF
MODE-2
Cadence zone
You can check your time in cadence zone, turn the cadence zone on/off, and change the cadence zone
range.
On the menu screen, Display 3 indicates the lower limit of the zone range while Display 4 indicates the
upper limit.
• Checking the time for stay in the cadence zone and specifying the cadence target
Press the START/STOP/ENTER button with the “Cadence zone” menu displayed to bring up the
target setting screen.
Time for stay in the cadence zone is displayed in the top row of Display-5.
NOTE: Resetting the main measurement returns the time in zone to zero.
The target setting status is displayed at the bottom of the display with either “on” or “off”.
The target is set at OFF in the initial setup.
Cadence zone
menu screen
Set target Changing the lower limit value Changing the upper limit value
Select Select
Set taget
Defining remote button menu screen
Upper limitLower limit
Time in cadence zone
Target setting status
(on/off)