Operation Manual

Start measurement
!Functions during measurement
Switching measurement data display
Power-saving mode
Button lock function
If you have power sensors
4. Importing summary data
1. Switching to Sensor Direct Mode
2. Starting/stopping measurement
3. Finishing measurement (reset operation)
Smart computer
Pressing and holding MODE when on the measurement screen generates
measurement data as summary results and resets measurement data to 0.
* When MODE has been pressed for 1 second, a smartphone search screen
appears, but you should continue to hold down the button.
* Total Distance (Odo) cannot be reset.
* The summary data generated is loaded into the smartphone.
Importing summary data
Reset
(3 seconds)
The maximum number of trips that smart computer can save temporarily is 30. If this
number is exceeded, the
MEMORY FULL appears on the screen, and the oldest
summary data is deleted when smart computer is reset.
Frequent importing of summary data to a connected smartphone is recommended.
Currently, summary data cannot be generated for trips less than 3 minutes long.
Important