Operation Manual

1. Connecting smart computer and smartphone

2. Performing pre-measurement preparation

3. Starting measurement

4. Pausing/resuming measurement

5. Finishing measurement

(reset operation)

Smart computer

Pressing MODE for 3 seconds will end measurement and switch to the [READY] display.

At this time, the trip data will be temporarily saved to the smartphone, and the measurements

on the smart computer will be reset.

To continue measuring, press SS/LAP for 1 second.

To ﬁnish measuring, save and upload the trip data through the smartphone.

Saving and uploading trips

(3 seconds)

Reset/

ﬁnish trip

Paused

During

measurement

Measurement

standby

Start measurement

6. Saving and uploading trips

! Functions during measurement

Switching measurement data display

Simple navigation function

Lap function